Powder Resins Scotchcast™ de 3M |
| Temp
class B : 130°C F : 155°C H : 180°C |
Product number |
Description | UL
System 1446 approval File number E163090 |
Cure Schedule |
Specific gravity |
Cut-through resistance |
Edge Coverage | Impact
Resistance (Inch-lbs, Newton meters) |
Get time at 193°C Hot plate | Dielectric
strength (Volts/mm) |
Volume Resistivity (ohm-cm) at 23°C | Color |
| B,F,H | 260 |
This
widely used, well known product is used primarily in spray and fluid
bed dip applications. Coarse ground version of 260 for improved fluidized performance. UL Recognized. |
Agree UL | 149°C 30mn | 1,43 | 215°C | 35-45% | 100 (11,3) |
12-16s | 1000 (12-15 mil coating) |
10E+15 | green |
| 177°C 10mn | ||||||||||||
| 204°C 30s | ||||||||||||
| 232°C 20s | ||||||||||||
| B | 262 |
This resin has excellent flow characteristics which produce uniform coating in applications such as resistance heated bobbin wound coils. It is used primarily in spray and fluid bed dip applications. | 149°C 40mn | 1,34 | 130°C | 38-48% | 100 (11,3) |
12-16s | 1000 (12-15 mil coating) |
10E+13 | red | |
| 177°C 20mn | ||||||||||||
| 204°C 60s | ||||||||||||
| 232°C 30s | ||||||||||||
| B,F,H | 263 |
263 is used primarily in spray and fluid bed dip applications and has been designed for use where high temperature cut-through resistance is required. UL Recognized. | Agree UL | 149°C 30mn | 1,47 | 290°C | 40-50% | 100 (11,3) |
8-14s | 1000 (12-15 mil coating) |
10E+15 | green |
| 177°C 10mn | ||||||||||||
| 204°C 30s | ||||||||||||
| 232°C 20s | ||||||||||||
| B | 265 |
Low melt viscosity and minimum build make this unfilled powder ideal for a variety of coating, bonding and impregnating applications, notably coating from a solvent. UL component recognition UL File E35075 | 149°C 60mn | 1,16 | Non applicable |
Not applicable |
160 (18,1) |
60 s | 1300 (12-15 mil coating) |
10E+14 | clear | |
| 177°C 20mn | ||||||||||||
| 204°C 5mn | ||||||||||||
| 232°C 2mn | ||||||||||||
| B | 270 |
This UL Recognized resin is used primarily in spray and fluid bed dip applications and has been designed for higher temperature cut through and bridging gaps around shading bands on stators. | 149°C 30mn | 1,48 | 250°C | 35-40% | 120 (13,8) |
12-16 s | 1000 (12-15 mil coating) |
10E+13 | green | |
| 177°C 10mn | ||||||||||||
| 204°C 30s | ||||||||||||
| 232°C 20s | ||||||||||||
| B | 5096 |
Liquid
Patching Compound Used for patching Scotchcast powdered resins, this two-part resin is a liquid, room temperature-curing, thixotropic product. UL recognized. Hardness of 85 Shore D. Mix ratio by weight is 10:0:2.25 (A:B). UL component recognition UL File E35075 |
25°C 24-48h | 1,18 | voir
fiche technique |
Not applicable |
- | 15mn at 60°C |
350
(v/mil) on 125 mils per Fed St 406 Méthode 4031 |
10E+13 | light grey | |
| 60°C 2h | ||||||||||||
| 95°C 1h | ||||||||||||
| B | 5133 |
This product accepts a charge very easily, which makes it ideal for electrostatic coating techniques. This product is designed to permit the thin coating of cold as well as heated parts such as capacitor cans, transformer covers, and resistors. | Agree UL | 149°C 30mn | 1,45 | 160°C | 15-25 | 120 (13,8) |
25-35s | 1000 (12-15 mil coating) |
10E+15 | blue |
| 177°C 10mn | ||||||||||||
| 204°C 30s | ||||||||||||
| 232°C 20s | ||||||||||||
| B, F | 5230N |
5230N is an updated version of the 5230 resin product. 5230N has superior charging capabilities and is designed to provide smooth uniform coatings using the electrostatic fluid bed application method. UL component recognition UL File E35075 | Agree UL | 177°C 15mn | 1,6 | 340°C | 50-70 | 160 | 25-30s | 1300 (12-15 mil coating) |
10E+14 | light blue |
| 204°C 6mn | ||||||||||||
| 232°C 3mn | ||||||||||||
| B, F, H | 5388 |
Formulated specifically for use in the electrostatic fluid bed process, 5388 provides superior cut-through resistance as well as excellent heat, chemical and moisture resistance. | Agree UL | 177°C 15mn | 1,57 | >340°C | 35-45 | 100 (11,3) |
25-35s | 1300 (12-15 mil coating) |
10E+14 | Blue |
| 204°C 6mn | ||||||||||||
| 232°C 3mn | ||||||||||||
| B | 5400 |
Wire
Coating Powder Resin Scotchcast 5400 was developed for continuous coating of wire products by electrostatic fluidized bed. Excellent flexibility and resistance to cracking due to heat shock or impact are just several of the very excellent characteristics this product exhibits. |
200°C 15mn | 1,22 | 180°C | Not applicable |
160mm (gardner 1/8 inch steel panel) |
18-25s
at 304°C |
7000-9000
volts (shot box) (12-15 mil coating) |
10E+14 | yellow tan | |
| 250°C 5mn | ||||||||||||
| 300°C 90s | ||||||||||||
| 350°C 30s | ||||||||||||
| B, F, H | 5555 |
Scotchcast 5555 can be applied via cold electrostatic fluid bed, hot venturi spray or hot fluid bed dip to provide a continuous, tough, moisture and chemical resistant dielectric coating for fractional horsepower motor stators and armatures. Available in three gel times. | Agree UL | à
204°C 10G 150s 22G 4mn |
1,7 | >340°C | 30-45% | 100 (11,3) |
10G: 9-11s 22G: 21-23s |
1300 (12-14 mil coating) |
10E+14 | green |
26, route de Paris - 77340 Pontault-Combault - FR - Tél 33 1 64
40 66 44 - Fax 33 1 64 43 82 95 - infos@tetrachim.com